Sawmill Bill of Materials
- system at 3600 psi, 24 gpm
- Note: x is the lengthwise axis, y is the cross cutting axis, and z is the vertical axis
Base frame
Approx. 3.5-4in wide/high x 19ft long "I" beams x2
Track frame - Y axis motion
Approx. 3.5-4in wide/high x 8ft long "I" beams x5
Gear rack, about 6ft long x 1-2in wide
Log clamps
threaded shaft
handle
metal pieces ("L" shape?)
shaft bearing?
Jacks
threaded shaft
handle
shaft bearing?
base pad
Space frame - X axis motion
8 x : 2" x 2" x 3/16" square tubing 10' @ 4.32 lbs/ft =
2" x 1/8" x 18" plates x40
2in x ? steel braces x?
Large Gears x2
Small Gears x2
Gear Pipe
Gear pipe bearings x3
Gear pipe handle
metal for holding small gears
metal for holding bearings
Saw Platform
Frame
2in x 1/8in x 20in steel x12
metal to hold bearings
Vertical asssembly Z axis motion
6ft? "I" beams x2
2 stopper L pieces for top and bottom about 2ft wide
pulley cable
pulley mount and wheel on top
pulley handle with locking teeth (spring tensioned?)
Saw Motor Frame
2 hydraulic motors - 40 hp each, 3600 psi
2 cushion valves, 24 gpm, 3600 psi
2 spool, 25 gpm valve
Hydraulic Hoses
Motor couplers
Motor coupler, main
Motor coupler, secondary
1 pulley,2.5x
2 pulley system, 2.5x each
1 main belt
2 secondary pulley belts
Main saw blade - 20"
2 edger blades - 9"
2 shafts for blades
3 attachments systems for blade - Multimachine style
2 sets of 2 pillow blocks to hold blade shafts
Ball bearings and bearing shafts x48
16 for space frame track
16 for saw assembly frame
16 for vertical saw assembly
Bolts and nuts
Need cost sourcing for all pieces.