Sawmill Bill of Materials
- system at 3600 psi, 24 gpm
- Note: x is the lengthwise axis, y is the cross cutting axis, and z is the vertical axis
Saw Platform
Saw Motor Frame
2 hydraulic motors - 40 hp each, 3600 psi
2 cushion valves, 24 gpm, 3600 psi
2 spool, 25 gpm valve
Hydraulic Hoses
Motor couplers
Motor coupler, main
Motor coupler, secondary
1 pulley,2.5x
2 pulley system, 2.5x each
1 main belt
2 secondary pulley belts
Main saw blade - 20"
2 edger blades - 9"
2 shafts for blades
3 attachments systems for blade - Multimachine style
2 sets of 2 pillow blocks to hold blade shafts
Vertical asssembly Z axis motion
6ft? "I" beams x2
2 stopper L pieces for top and bottom about 2ft wide
pulley cable
pulley mount and wheel on top
pulley handle with locking teeth (spring tensioned?)
Frame
2in x 1/8in x 20in steel x12
metal to hold bearings
Base frame
Approx. 3.5-4in wide/high x 19ft long "I" beams x2
Track frame - Y axis motion
Approx. 3.5-4in wide/high x 8ft long "I" beams x5
Gear rack, about 6ft long x 1-2in wide
Log clamps
threaded shaft
handle
metal pieces ("L" shape?)
shaft bearing?
Jacks
threaded shaft
handle
shaft bearing?
base pad
Space frame - X axis motion
8 x : 2" x 2" x 3/16" square tubing 10' @ 4.32 lbs/ft =
2" x 1/8" x 18" plates x40
2in x ? steel braces x?
Large Gears x2
Small Gears x2
Gear Pipe
Gear pipe bearings x3
Gear pipe handle
metal for holding small gears
metal for holding bearings
=Bearings and bearing shafts= x48
16 for space frame track
16 for saw assembly frame
16 for vertical saw assembly
Bolts and nuts
?
TODO
Need cost sourcing and weight for all pieces.