PowerCube Battery mount

From Open Source Ecology
Revision as of 04:12, 12 December 2011 by Tom Griffing (talk | contribs) (Created page with "===Battery mount=== *Weld the two mounts to the angle iron and tank to form a rectangle for the battery as shown below. ::Image:PowerCubeAssemblyBatteryMount1.png *After th...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Battery mount

  • Weld the two mounts to the angle iron and tank to form a rectangle for the battery as shown below.
PowerCubeAssemblyBatteryMount1.png
  • After the mount has cooled, lower the battery into the rectangle to verify it fits properly.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Battery_mount&oldid=47718"