PowerCube Finish and Painting

From Open Source Ecology

Revision as of 04:18, 12 December 2011 by Tom Griffing (talk | contribs) (Created page with "===Finish and Painting=== * Remove the engine if present * Cover holes of tanks and any other place that should not be painted. * Check all external surfaces for sharp edges and ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Finish and Painting

Remove the engine if present
Cover holes of tanks and any other place that should not be painted.
Check all external surfaces for sharp edges and smooth with angle grinder.
Remove any surface rust with wire brush and / or sandpaper.
Apply a thorough coating of paint to all steel surfaces.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Finish_and_Painting&oldid=47724"