Talk:CAD Standards

From Open Source Ecology

Revision as of 20:29, 14 December 2011 by James Rogers (talk | contribs) (Created page with "'''James Rogers (14 Dec 2011 - 15:30 EST)''': For fasteners and fittings I recommend we use the large quantity of quality models available from McMaster-Carr[http://www.mcmaster....")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

James Rogers (14 Dec 2011 - 15:30 EST): For fasteners and fittings I recommend we use the large quantity of quality models available from McMaster-Carr[1] as almost everything they sell is available to download in a variety of formats.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Talk:CAD_Standards&oldid=48096"