CNCCMV2/CAD

From Open Source Ecology
< CNCCMV2
Revision as of 17:35, 1 April 2012 by YK (talk | contribs) (Created page with "=Uniformity Goals= *Keep 2 block dimensions same for all blocks *Based on the conceptual design, 1 of the block dimensions will solely be used to fit the diameter of the leadsc...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Uniformity Goals

  • Keep 2 block dimensions same for all blocks
  • Based on the conceptual design, 1 of the block dimensions will solely be used to fit the diameter of the leadscrews, precision shafts, and sleeve bearings.
  • The other block dimension to be uniform will mostly support the part by its length on precision shafts.
  • For accomodating leadscrew nuts up to 10mm or 3/8" dia, dimension 1 will be 40mm.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNCCMV2/CAD&oldid=58619"