CNCCMV2/Structure

Safety

• Wear safety glasses and gloves during cutting, drilling, filing, and cleaning operations

Point Marking with Datum Point/Edge

• Measure the appropriate distance from the datum point/edge and scribe the length point with 2 small lines

• Repeat for all dimensions, all points to be marked

Match Drilling

• Set 2 components one on top of the other, mount securely, then drill through both pieces at the same time for exact matching accuracy.

• Match drilling works effectively with templates

• Match drilling works effectively for pieces before they are cut apart

Cutting

Cutting

Blocks

Blocks

Fabricate Shaft Collar

• File:ShaftCollarV2.pdf

• Qty= 12

• Mark and drill setscrew holes

• Lathe-drill shaft hole

• Tap setscrew holes

Fabricate Axis Coupling

• File:AxisCouplingV2.pdf

• Qty= 4

• Mark and drill setscrew holes

• Lathe-drill smaller shaft holes, then larger shaft holes

• Tap setscrew holes

Fabricate Spindle Coupling

• File:SpindleCouplingV2.pdf

• Qty= 1

• Mark and drill setscrew holes

• Lathe-drill smaller shaft holes, then larger shaft holes

• Tap setscrew holes

Fabricate Spindle Bit Coupling

• File:BitCouplingV2.pdf

• Qty= 1

• Mark and drill setscrew holes

• Lathe-drill smaller shaft holes, then larger shaft holes

• Tap setscrew holes