CNCCMV2/Structure/Collars Couplings

From Open Source Ecology
< CNCCMV2‎ | Structure
Revision as of 21:51, 24 April 2012 by YK (talk | contribs) (Created page with "=Fabricate Shaft Collar= *File: ShaftCollarV2.pdf *Qty= 12 *Mark and drill setscrew holes *Lathe-drill shaft hole *Tap setscrew holes =Fabricate Axis Coupling= *[[File...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Fabricate Shaft Collar

  • Qty= 12
  • Mark and drill setscrew holes
  • Lathe-drill shaft hole
  • Tap setscrew holes

Fabricate Axis Coupling

  • Qty= 4
  • Mark and drill setscrew holes
  • Lathe-drill smaller shaft holes, then larger shaft holes
  • Tap setscrew holes

Fabricate Spindle Coupling

  • Qty= 1
  • Mark and drill setscrew holes
  • Lathe-drill smaller shaft holes, then larger shaft holes
  • Tap setscrew holes

Fabricate Spindle Bit Coupling

  • Qty= 1
  • Mark and drill setscrew holes
  • Lathe-drill smaller shaft holes, then larger shaft holes
  • Tap setscrew holes
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNCCMV2/Structure/Collars_Couplings&oldid=60353"