Shelves

From Open Source Ecology
Revision as of 16:52, 18 May 2012 by YK (talk | contribs) (Created page with "=Designing with Angles and Side-Bent Metal Sheets= *'''The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent m...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Designing with Angles and Side-Bent Metal Sheets

  • The direct way to set up the shelf is to have 4 angles standing vertically at the 4 corners of the rectangular side-bent metal sheet, angle-to-sheet fastened with screws, at least 1 at each corner. At this point the remaining question is how to support the shelf for rigidity.