Cold Saw/V1 Design Parameters/Clamp System

From Open Source Ecology

< Cold Saw‎ | V1 Design Parameters

Revision as of 21:27, 20 May 2012 by YK (talk | contribs) (→‎Clamp Axis Holes)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Clamp Axis Holes

Clamp Axis Centerline Height: 25mm

Spacing Along Length: 25mm, 75mm, 125mm

Fixed Block

Length: 150mm

Width: 75mm

Height: 50mm

Mount Spacing Along Length:

Mount Spacing Along Width:

Mount Hole Diameter:

Moving Block

Length: 150mm

Width: 50mm

Height: 75mm

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Clamp_System&oldid=62852"