Cold Saw/V1 Design Parameters/Clamp System

From Open Source Ecology

< Cold Saw‎ | V1 Design Parameters

Revision as of 21:48, 20 May 2012 by YK (talk | contribs) (→‎Shafts)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Clamp Axis Holes

Clamp Axis Centerline Height: 25mm

Spacing Along Length: 25mm, 75mm, 125mm

Shaft Hole Diameter: 12mm

Threaded Rod Hole Diameter: 12mm

Fixed Block

Length: 150mm

Width: 75mm

Height: 50mm

Mount Spacing Along Length: 40mm, 110mm

Mount Spacing Along Width: 15mm, 60mm

Mount Hole Diameter: 12mm

Moving Block

Length: 150mm

Width: 50mm

Height: 75mm

Clamp Jaws

Shafts

Diameter: 12mm

Length: 250mm

Threaded Rod

Shaft Collars

Thrust Washer

Handle

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Clamp_System&oldid=62871"