Cold Saw/V1 Design Parameters/Drive System

Hydraulic Motor

• Mount Hole Pattern: 40mm x 100mm

• Mount Hole Diameter: 12.7mm

Interface Plate

• Length: 200mm

• Width: 75mm

• Thickness: 25mm

• Drive Hole Diameter: 40mm

• Drive Hole Spacing Along Length: 70mm

• Drive Hole Spacing Along Width: 40mm

• Motor Mount Hole Spacing Along Length: 20mm, 120mm

• Motor Mount Hole Spacing Along Width: 20mm, 60mm

• Motor Mount Hole: 12mm

• Interfacing Hole Spacing Along Length: 150mm, 180mm

• Interfacing Hole Spacing Along Width: 20mm, 60mm

• Interface Hole: M12

Shaft Coupling

• Outside Diameter: 51.4mm

• Bore: 31.8mm

• Length: 75mm

• Setscrew Hole Diameter: (4mm Hex)

• Setscrew Hole Spacing Along Length: 25mm

Inside Plate

• Length: 75mm

• Width: 75mm

• Thickness: 12mm

• Drive Hole Spacing: 37.5mm, 37.5mm

• Pinhole Pattern from center: XXmm, XXmm

Outside Plate

• Length: 75mm

• Width: 75mm

• Thickness: 12mm

• Drive Hole Spacing: 37.5mm, 37.5mm

• Pinout Pattern from center: XXmm, XXmm

Spindle

• Outside Diameter: 1.25"

• Length: 75mm

Blade

• Bore: 1.25"

• Diameter: 250mm

• Pinhole Pattern from center: XXmm, XXmm