Cold Saw/V1 Design Parameters/Support System

From Open Source Ecology

< Cold Saw‎ | V1 Design Parameters

Revision as of 01:00, 26 May 2012 by YK (talk | contribs) (→‎Support Thrust Washer)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Shaft Block

Length: 75mm

Width: 50mm

Height: 75mm

Support Shaft Hole Diameter: 31.8mm

Support Shaft Hole Spacing Along Length: 37.5mm

Support Shaft Hole Spacing Along Height: 50mm

Mount Hole Diameter: 12mm

Mount Hole Spacing Along Length: 10mm, 65mm

Mount Hole Spacing Along Width:25mm

Bridge Bar

Length: 25mm

Width: 75mm

Thickness: 25mm

Support Shaft Collar

Length: 30mm

Outside Diameter: 60mm

Bore: 31.8mm

Setscrew Type: M12

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Support_System&oldid=63755"