Cold Saw/V1 Design Rationale/Movement System

From Open Source Ecology
< Cold Saw‎ | V1 Design Rationale
Revision as of 18:33, 8 June 2012 by YK (talk | contribs) (Created page with "*'''Rotary Shaft and Support''' *'''Swivel Head''' (to allow angled cuts) Image: ColdSawV1SwvHead.png Notes: The swivel clamp fastener should be mounted such that the swiv...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Rotary Shaft and Support
  • Swivel Head (to allow angled cuts)

ColdSawV1SwvHead.png

Notes: The swivel clamp fastener should be mounted such that the swivel plate is horizontally clamped to the base disc. If the fastener is vertically mounted, then clamping the swivel head can cause bending that reduces the precision of the Cold Saw.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Rationale/Movement_System&oldid=65082"