CEB

Steps

• Lay small concrete blocks or pads along the exterior perimeter of the building; use waterproof sealing compound to ensure zero water penetration underneath these blocks/pads

• Ready the dirt site for loading desirable dirt by clearing away the topsoil.

• Position the CEB Press such that its output can be carried by rollers to the area where the next wall will be constructed.

• Start mixing batches of slurry to be used for adhering the CEBs together.

• Operate the CEB Press, loading and unloading dirt into its hopper.

• Apply slurry at the top face of the existing CEB wall (if none, apply on the concrete); also slurry side faces on the existing wall that can be contacted by the next block to be laid.

• Lay a block on the slurried surface and position it evenly with contact on the slurried side face.

• Keep operating the CEB Press, mixing batches of slurry, and laying blocks until the wall is complete.

• Reposition the CEB Press for further wall construction.

• Rework the dirt extraction site if the piles of usable dirt are dwindling.