Larry Dobson- Gassifer/Boiler
Building & Testing a Gasifier/Hydronic-Furnace
by Larry Dobson 2/14/12
www.fundamentalform.com , lad@fundamentalform.com
Abstract:
Civilization’s almost total dependence on diminishing fossil-fuel resources is destroying our planet and must be changed quickly. The gassifier-boiler that this proposal aims to build, based on 38 years of R&D, will be capable of both: producing high quality steam at 650 degrees and 800 psi for steam power production, and generating higher quality Syngas than any other model on the market. This internal doulbe-functionality is unique to this machine, and would be achieved as easily as turning a damper.1 This residential-size gasifier/hydronic-heater will convert locally available waste biomass material from forestry, agricultural, processing industries and municipal waste streams, much of which is now a costly disposal problem, into valuable decentralized energy utilizing existing I.C. engines. This integrated system can convert a greater variety of feedstock, size and moisture content at higher efficiencies than currently existing technologies. Such efficient decentralized energy production has the potential to greatly assist local energy self reliance, create local employment, keep energy dollars in the community and convert costly landfill waste disposal into valuable energy generation.
According to a new study, forest biomass could replace as much as 28% of the liquid fossil fuel now being used for industrial and commercial heating in the Northeastern US. In the Pacific Northwest alone, about one quad (1,000 trillion BTUs) of biomass residues are physically generated each year. This is equivalent to 160 million barrels of oil, or $10 billion per year in residential fuel oil. It represents the heat equivalent of 1½ times the annual electric power consumption of the Pacific Northwest. This scenario is repeated across the nation and around the world.
Detailed plans have already been drawn up and are now offered free open-source on the OSE website as part of the GVCS (http://opensourceecology.org/wiki/Gasifier_Burner_with_Heat_Exchanger_Prototype_I ). This will not only make the technology available to all, it will facilitate further R&D work to perfect the design, fabrication, operation and longevity of the technology.
This first prototype will be fabricated by Larry Dobson in Washington State, tested, then sent to the Factor-E-Farm to heat, power and provide producer gas for a variety of applications, from kilns & forges to I.C. engines. Should the proposal be accepted, the Production will take place over the months of August-October, testing from October-November, and the finished product can be expected at Factor e Farm in December.
Economics Analysis
This project is of high economic and symbolic significance to Open Source Ecology. Symbolically it will be a major milestone- once incorporated into an energy system with the steam engine- of reaching fossil fuel independence by sourcing local biomass as an energy source. The biochar byproduct from this process will serve to enhance the fertility of the Factor e Farm (FeF), in contrast to the poisoning effect that the use of fossil fuels have on our world. Maybe even more significant will be the economic effect, as FeF will soon be able to produce it's own biomass and energy from free solar inputs, leaving only labor costs (which are typically low at FeF, and can be reduced with the completion of a microcombine).
Even more significant could be the retail prospects for this project. Following the model being adopted for the CEB, the energy system could be produced on site and sold around the country to fund further FeF projects. While the CEB has a considerable market, it is a more specialized use, compared with the demand for (particularly green) energy. Production costs can reasonably be considered to be low since the gassifier requires no complex external components, and much of the budget in this proposal is dedicated to testing equipment which is a one-time cost.
The extensions could drive this cost down dramatically, since gassifier could heat a kiln which could fire local FeF clay for the creation of the refractory. Even a syngas foundry could potentially be developed, and at this point FeF would retain all the value added from scrap metal and virgin clay into a fully functioning Gassifier/Steam Engine energy system- which in turn will be capable of providing customers with extensive energy savings. Following the model of many solar companies FeF could provide complete energy services to customers (including potentially growing and delivering biomass and recouping biochar) while collecting the margin of savings that results from the customer's switch from grid to biomass energy- this could make the transition extremely accessible to customers of all economic backgrounds, and ensure and essentially unlimited market.
Deliverables
As detailed on the above webpage, I have completed detailed plans for a heating system with the following features:
A residential-size hot water heater, named “Roundy”, fueled with wood- or agricultural waste- pellets, wood chips, corn cobs and other biomass fuels, able to operate on natural convection flow or fan. This unit will also operate as a stand-alone gasifier, generating woodgas of a quality for running an I.C. engine or other gas-fueled appliances, such as refrigerator, cookstove, foundry kiln, etc., or being easily adjusted to produce superheated steam instead. Size will heat an insulated building of about 3000sq.ft.
Configuration will include gasifier fuel hopper with combustion chamber and heat-exchanger modules integrated into one unit. Gasifier will include manual grate adjustment and rotation for ash-separation at coal-bed, ash-collection with manual removal, and manual air-intake dampers for gasifier and combustor. Steam at 650 degrees and 800 psi will be produced inside a concentric tube-and-annulus heat exchanger (HX) that will be of spiral design of sufficient efficiency to allow condensation of moisture from flue gases on low settings and high efficiency. The plans include 62 pages of detailed drawings, 15 pix, 11 pages of explanation and instruction, 43 pages of CNC cutout drawings.
From these plans, I will build and test this prototype over a 3-month period, beginning from signing of the construction grant contract. Deliverables include:
- The complete gasifier/furnace, including:
- Variable-speed high-pressure fan to test the full range of operating parameters
- Water pump
- stainless stovepipe ~ including bypass + unions & elbows
- 304 Stainless steel parts, laser-cut and welded
- castable ceramic refractory
- insulation blanket
- imbedded Type-K thermocouples to monitor
- 1 = gasification flame temp
- 2 = gas combustion temp
- 3 = preheated gasification air temp
- 4 = exhaust or exiting gas temp
- 5 = hottest gas temp
- 6 = top of hopper temp
- 7 = water jacket cold inlet
- 8 = water jacket hot exit
- A Bacharach combustion analyzer to monitor O2, CO, flue temperature, stack temperature, combustion air temperature, draft and differential pressure $1640
- preparing, transporting to shipping terminal, shipping to Factor-E-Farm - $1000
2012 PRICING FOR COMPETITIVE HYDRONIC FURNACES
| Furnace | Cost | Weight (lb) | Features | Unit Size(ft^3) | Firebox Size (ft^3) |
| Roundy | 1400 | This is both hydronic furnace and straight gasifier in one. Handles much greater variety of fuel size & moisture content. Has much larger HX surface area (140ft2) for high-efficiency & clean exhaust/producer-gas in condensing mode. Very high & efficient turn-down for optimumized heat/gas production. Exhaust temp 130 - 300F, far lower than all competition. Stainless steel and refractory ceramic for longevity - most oth | 61 | 4.7 | |
| GEK® TOTTI™ 20kW Ready to Assemble | $ 5,585 | ? | with exhaust preheat & fuel drying. 20kW is 68,000Btu/hr = half or less of Roundy | ? | ? |
| Victory Gasifier (2012 price) | $15,134 | 450 | 5-15kW,incl.H20 HX,fuel pre-drying bin,cooler,filter,blower, stainless construction, no furnace | ? | 4.7 |
| Portage & Main outdoor water furnace Economizer IDM 100 | $ 8,500 | 1600 | firetube water boiler | 45 | 7 |
| Optimizer 250 | $ 11,500 | 3030 | up to 250K Btu/hr, designed for batch burn & hot water storage | 145 | 11 |
| Garn 1500 | $ 16,000 | 3200 | |||
| Tarm-30 | $ 8,000 | 1080 | 600F flue temperature on high burn | ? | 4 |
| Greenwood Frontier CX | ? | 1480 | 750lb refractory | 50.7 | 8.4 |
| New Horizon BioMass 40 | $ 6,600 | 1212 | |||
| AAA Outdoor Boiler wood/coal gasification boiler - R120 | $ 6,000 | 1,652 | flue temp = 310-340F, claimed 91% (impossible with such high exhaust Temp. | 42.8 | 5.4 |