Solenoid Driver

From Open Source Ecology

Revision as of 21:11, 21 September 2012 by YK (talk | contribs) (→‎Old Info)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction

The objective is a circuit board with 5 relays (electrically operated switches) that can be used for higher response performance with inductive loads (by having a freewheeling diode for each of the 5 channels) and signals activation (by having an LED for each channel).

Action Info

Solderable Breadboard

Resistor 100 ohm

Resistor 1k ohm

Resistor 10k ohm

Developers

Yoonseo Kang - ykang404@gmail.com

Old Info

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Solenoid_Driver&oldid=74293"