Talk:Hall Effect Sensor Module

From Open Source Ecology

Revision as of 09:27, 5 October 2012 by ChuckH (talk | contribs) (Created page with "The silicone caulk used must not be the usual acetoxy cure type, which releases acetic acid and corrodes copper wires. There are non-corrosive "neutral cure" silicones out there ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The silicone caulk used must not be the usual acetoxy cure type, which releases acetic acid and corrodes copper wires. There are non-corrosive "neutral cure" silicones out there but you have to specifically look for them.

Here's one reference http://www.logwell.com/tech/servtips/RTV.html.

Would hot-melt glue work here?

ChuckH 11:27, 5 October 2012 (CEST)

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Talk:Hall_Effect_Sensor_Module&oldid=75661"