Cold Saw

See corresponding blog post for details - [1]

Mechanical

Cold Foundation

Cold Blade Mount

Cold Blade Guard

Cold Moving Arm

Cold Swivel Frame

Cold Vise

Motor Hydraulics

31.88 cu. in Hydraulic Motor from SurplusCenter

---

1/2" Quick Connect Pairs x3

1/4" Quick Connect Pair x1

1/4" NPTM x 1/4" NPTM Hose, 12" Long

1/2" NPTM to 1/2" NPTM x2

1/2" NPTM to 1/4" NPTF x1

---

Coolant Hydraulics

3.6L/min Submersible Pump

Silicone Rubber Tube 1/4" ID, 1/2" OD

Electronic

12V input suffices.

Infrared Distance Sensor Switch

Old

Cold Saw Github Repository

Explainer Video on Youtube

Test Cut 2 Video - blade did not loosen, but baseplate was not clamped to table so lots of vibration; fully smooth cut

Test Cut 1 Video - blade retaining setscrews not tightened enough so blade loosened; cut halfway smooth