File:016SketchPortfolio UJ MartinBolton.JPG

From Open Source Ecology
Revision as of 11:45, 10 January 2013 by Martin Bolton (talk | contribs) (016SketchPortfolio_UJ_MartinBolton Exploring manufacture of Filter Receptacle Extrusion Blow Moulding (same process used for manufacture of large white plastic milk bottles) would allow for a component with a narrower opening than the standard 'bucket...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file(900 × 636 pixels, file size: 96 KB, MIME type: image/jpeg)

016SketchPortfolio_UJ_MartinBolton

Exploring manufacture of Filter Receptacle Extrusion Blow Moulding (same process used for manufacture of large white plastic milk bottles) would allow for a component with a narrower opening than the standard 'bucket shape'which is manufactured using Injection Moulding.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:45, 10 January 2013Thumbnail for version as of 11:45, 10 January 2013900 × 636 (96 KB)Martin Bolton (talk | contribs)016SketchPortfolio_UJ_MartinBolton Exploring manufacture of Filter Receptacle Extrusion Blow Moulding (same process used for manufacture of large white plastic milk bottles) would allow for a component with a narrower opening than the standard 'bucket...

The following page uses this file: