CEB Press 2

CEB design 2

Error creating thumbnail: File missing

Error creating thumbnail: File missing

Error creating thumbnail: File missing

Design

File:Liberator 2 Design 1.blend

Function

Sourcing

Error creating thumbnail: File missing

5" Welded Clevis type, Dalton source

Error creating thumbnail: File missing

5" Welded Tee type, Dalton source

Error creating thumbnail: File missing

5" Welded Tee Prince Gladiator, Dalton source

Error creating thumbnail: File missing

14 inch hopper cylinder

Error creating thumbnail: File missing

hopper auger motor, 1.9 cu in

Hydraulic Cylinders

• 5x8x2.5" - $361 - Dalton Hydraulic source, welded tee
• 5x8x2.5" - $457 - Surplus Center source
• Prince Gladiator wekded cross tube - $514 - Dalton
• 14 inch hopper cylinder - $119 - Surpluscenter

Hopper Auger Motor

• Small motor, about 1 hp required - $239

Cam followers:

• http://cgi.ebay.com/McGill-Camrol-CCF-2-SB-Cam-Follower-bearing-_W0QQitemZ320242893200QQcmdZViewItem
• http://www.vxb.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=bearings&Category_Code=Cam-Follower
• 2" cam follower for 10 bux! http://www.alliedbearings.com/mfg_prod/bearings/ept_brgs/camrolrevised2.pdf
• http://www.maraindustrial.com/servlet/the-1461/McGill-Camrol-CF-1754/Detail
• http://www.megapalm.com/item-44250-cam-followers--needle-bearing-design-type-stud-cam-follower-roller-diameter-1-roller-width-06250-in-stud-diameter-04375-in-thread-size-7-16-20-dynamic-load-capacity-2190-length-1000-in-material-steel.html
• 1-1/8" cam follower
• 1" cam follower
• mcgill cam followers catalog

CEB Hydraulics Build