Shopping List

Introduction

CEB Hydraulics Functional Diagram

Hydraulic power detail.

Hydraulic tank detail.

• Start with CEB Functional Diagram to the right:
• Continue to hydraulic power system detail:
• And tank plumbing.

Shopping List for April 27, 2009:

MicroTrac Body

Hose lengths from valve to wheel motor are 6 feet.

32 cu in wheel motor, 5130 in oz torque, 145 rpm at 20 gpm

3 spool, OC, 25 gpm valve

3x8" cylinder, SAE 8 in/out, 16" closed pin-to-pin

1 7/8" bearing

1 7/8" double split lock collar

SAE 10 to 1/2" NPT

half inch npt quick coupler pair

quarter inch npt quick coupler pair

File:Halfhose72.jpg

half inch npt hose

quarter inch hose

Valve in/out couplers

14 GPM suction strainer, 1" NPTF outlet

20 GPM return line filter

• Wheel motor - $250 - use quick coupling for interchangeability of motor, shared between devices
  • Requires fabrication of quick coupler mechanism - equivalent of bicycle quick release except much stiffer
  • MicroTrac will be required for use on many occasions, so wheel motor, though quick release, should be dedicated to MicroTrac. Another motor, used for MicroTrac auger, should be shared.
• Control valve, 3 body, SAE 12/16 In/Out, SAE 10 work ports, $200 - 25 gpm, # SAE 12/16 IN/OUT ports, SAE 10 work ports
• 3.0 inch cylinder - SAE 8 outlets - $45
• 2 bearings - 1 7/8" - $20 ea
• 2 double split collars - 1 7/8" - $7 ea
• Fittings and hose. Use quick couplers on motors and cylinders

• • Motor - has in/out plus a case drain

• • • 2 - SAE 10 to 1/2 NPTM straight - $1.89 ea
    • 1 - SAE 4 to 1/4 NTPM - $0.95
    • 2 - 1/2 NPT quick coupler pair - $16 ea
    • 2 - 1/4 NPT quick coupler pair - $12
    • 1 - Shared case drain tee - $2.50
    • 2 - quarter hex nip - $0.75 ea.

• • Valve - has in/out plus 3 identical work port pairs

• • • 6 - SAE 10 to 1/2 NPTM straight (as above) - $1.89 ea
    • 8 - 6 for work ports and 2 for in/outlet - 1/2 NPT(F) quick coupler pair - (note that quick couplers fit just about exactly in allowed space of 1.5" between adjacent ports) - $16 ea
    • 1 - SAE 12 inlet to 1/2 NPTF straight swivel - $3.79
    • 2 (one for inlet, one for outlet) - 1/2" NPTM elbow - $2.75
    • 1 - SAE 16 outlet to 3/4" NPTF straight - $5.25
    • 1 - 3/4 to 1/2 bushing - $1.60
  • 2 - 1/2x60" hose with NPTM ends - $12.35 ea.

• Cylinder
  • 2 - SAE 8M to 1/2 NPTM - $1.25 ea
  • 2 - 1/2" quick coupler pairs (same as above) - $16 ea.

• Metal
  • 1 7/8" shaft
  • 1/8x1.5" tubing
  • Bolts and other mounting plates
  • Quick coupler plate metal

NOTES: Make the case drain outlet on the wheel motor accept the case drain from the implement. To do this, use a tee.

CEB Prototype 2

5" Welded Clevis type, Dalton source

5" Welded Tee type, Dalton source

14 inch hopper cylinder

hopper auger motor, 1.9 cu in

0-5 GMP needle valve, 1/4"

Hydraulics

• 5x8x2.5", 1/2" NPT ports, Dalton Hydraulic source, welded tee - $361
• 14 inch hopper cylinder - $119 - out of stock
  • Instead: cylinder with swivel eyes - $105
• Auger motor, 1.9 cu in - $239

• Fittings and hose

• • Main Cylinder
    • 2 - 1/2" NPT elbows (same as above) - $2.75 ea.
    • 2 - quick couplers (same as above) - $16 ea.
    • 2 - 1/2"x120" hose - $21 ea.

• • 14" cylinder
    • 2 - SAE 6M to 3/8 NPTM solid - $1 ea.
    • 2 - 1/2" to 3/8" NPT reducer bushing - same as above - $1 ea.
    • 2 - quick couplers (same as above) - $16 ea.
    • 2 - 1/2"x120" hose - $21 ea.
    • 1 - needle valve - $26
    • 2 - 1/4" nips - $0.75 ea.
    • 1 - 1/4" to 1/2" F-F expander coupler - hardware store
    • 1 - 1/4" to 1/2" F-M reducer bushing - $0.90

• • Auger motor
    • 2 - 1/2" quick coupler pairs as above - $16
    • 2 - 3/8" nip - $1
    • 2 - 1/2" to 3/8" bushing - $0.85
    • 2 - 1/2"x120" hoses - $21
    • 1 - 1/4" quick coupler pair - [1] - same as above, $12
    • 1 - 1/4"x120" hose - $17.50

Guides

• Cam rollers -
• Guide Bearings -

Power Cube

Suction strainer

Return line filter

0.677 cu in 10 gpm hydraulic pump

Flexible Shaft Coupler

• Coupler half, 5/8" - $10
• Coupler half, 1" - $10
• Solid spider - $14
• Hydraulic pump - 0.677 cu in, 5/8" keyed shaft, 10.1 gmp @3600 RPM, 3000 PSI max, 4000 RPM max - $180
• 3/4" NPT 20 GPM Filter - $17
• 14 GPM suction strainer - $20

• Fittings -

• • Filter (3/4" NPT)
    • 1/2" NPT tee
    • 3 - 1/2" nip - $1.35
    • 2 - 3/4" to 1/2" reducer bushing - $1.60
    • 1 - 1/2" quick coupler (same as above) - $16
    • 1 - 1/2" to 1/4" reducer bushing - $0.90
    • 1 - 1/4" nip - $0.75
    • 1 - 1/4" quick coupler - same as above, $12
    • 1 - 1/2" elbow coupling - hardware store
    • section of 1/2" pipe all way to bottom of tank

• • Suction Strainer
    • 1"-3/4" bushing - $1.95
    • 3/4" NPT pipe section, 18"
    • 2 - 3/4" NPT elbow couplers
    • 3/4" NPT hex nip - $2.20

• • Hydraulic Pump
    • Pump outlet - SAE 10 to 1/2 NPTM straight - $1.89
    • 1/2" quick coupler - same as above - $16

• • Suction Hose
    • 3/4 NPTM to hose barb connector - $4.69
    • Pump inlet - SAE 12 to 3/4 hose barb connector - $4.69

• Hose - suction from tank to pump - got it already; from pump to valve included already
  • 2 - 1/2"x60" hose, NPTM - $12.35 ea
  • 2 - 1/2" quick couplers (same as above) - $16

• Metal

Pulverizer

Note: can convert Rototiller to pulverizer, and auger (posthole, planting auger, mixer), according to 'lifesize erector set' philosophy. This can be done by exchanging the motor for a faster one, and using a different set of tines.

• Coupler - needs PTO 6-spline to 1-7/8" shaft converter
• Fittings - have PTO motor already; maybe purchase quick connects for it (in/out sae 10, sae 4 case drain)
  • 1 -Go from SAE 4 to 1/4 male for $1
  • 2 -SAE 10 to 1/2 NPTM at $2
  • 2 - coupler pairs at 1/2" - at $16
  • 1/4" quick coupler - 1/4" $11
  • 1/4"x120" hose - same as before - $17.50

• Metal

HexaHatch

• Gear motor with 1/4" shaft - $10
• 1/4" coupler - $4

Parts Total

The above total for hydraulic and other components, minus structural metal, is $2236.