E3D V6 Hot End
(Redirected from E3D Hot End)
Contents
Authentic Version
The original and authentic version of the E3D Hot end is found at the E3D website - https://e3d-online.com/v6
The instruction manual for assembling the hot end is at https://e3d-online.dozuki.com/Guide/V6+Assembly/6
Clones
How to tell authentic E3D hot ends? They do not have Teflon inside so they can do high temperature printing for materials that need higher temperature
"All Metal"
- The E3D All Metal hot end clone above has a Teflon liner. See thread - https://reprap.org/forum/read.php?152,556240
- Note that you can select between Teflon and no Teflon with this Ebay store - so if you have the right supplier, you will get the high temperature version? [1]
Max Temp for Teflon
- 225 C according to this thread - https://www.3dhubs.com/talk/thread/max-extruder-temp-ptfe
Sourcing
Whole
- Authentic E3D - [2]
- Bowden - not good as we want direct drive for rubber printing - [3]
- $12 direct - [4]
- $20 direct 2-pack -[5]
Heat Break
- 10 for $10 - [6]
