Seed Eco-Home 3 3D CAD

From Open Source Ecology
(Redirected from SH3 CAD)
Jump to: navigation, search


Updated Walls

Updated wall modules https://drive.google.com/drive/folders/1g7LEFEEsaIRU5bAUBurge6YieXr0s1pV?usp=sharing

1st story all assembly (some details on the modules are outdated, do not use these as reference to build modules, only for assembly purposes) https://drive.google.com/drive/folders/1Lp3ILl0fBzTP_3jjFQgMABeLTGtGfYU9?usp=sharing

Vertical assembly simulation File: https://drive.google.com/file/d/1mX8w3RzRHFxx48XEXSSdMaGa9ojHOana/view?usp=sharing

Folder (it's the wall modules assembly file): https://drive.google.com/drive/folders/1sRERDUL_lp9ukx1uFnxZNu26VTATVoJo?usp=sharing

Concept / Changes from v2

v3 update

HintLightbulb.png Hint: These modules now have a single center stud instead of two studs at 16" centers

Modules in FreeCab

These wall panels use 10' OSB on the exterior. The OSB is offset 0.75" to the left and 1" down on each panel to help align the panel sides, sill, and top plate during installation. The interior side has small temporary tabs of 4" x 4" OSB added to assist with alignment.

Roof