Talk:3D Printed Cycloidal Drive
There were a couple of designs for these. I made a playlist of the ones i came across, but some organizing+on-wiki documentation is definitely in order.
The best ones probably use Off The Shelf Ball Bearings / Thrust Bearings and whatnot, with FDM 3D Printed Parts around all that, but not actually being the bearing / wear surfaces .
Threaded Inserts would be nice too from a Design for Disassembly standpoint (Either for Bearing Replacement, or for Deconstruction before recycling/burning the plastic, and recycling the bearings at Product End of Life etc
Let me go grab the link to that playlist.
--Eric (talk) 11:35, 5 January 2026 (UTC)
Took too much digging, sheeeeeesh. YouTube isn’t optimized for a PILE of playlists, although their latest sorting update adds not just A-Z, but Z-A which helps.
Standardizing my “DIY/OS” vs “DIY and/or OS” and all that will help with sorting too but that’s a project for another day
ANYWHO
https://youtube.com/playlist?list=PLq6IzRhDFdPOygI2RCaTdf6DI-uAM8SOA&si=skf2oYtc5Dr2Zxye
There’s the link