View source for Beber Log


== 202001'''31''' ==

'''Will my first attempt to print work?''' Apparently '''no =/''' 

> for some weird reason the SD card does get recognized as inserted, but then it still says 'No SD card'

.. switched the card reader/screen and connector shield: no success =/ 

.. switched the smart adaptor: no success =/ 

.. tried the card reader/screen plus SD card on other build: works as expected! 

.. flashed a new Mega and switched it: no success =/ 


[[File:D3duniversal_8.ini]] definitely needs to be added to [[Getting_Your_D3D_Printer_Running]] and [[D3D_Lulzbot_Cura]] pages, and these steps need to be referenced or included in the [[D3D_Universal_Build_Manual]]. Also, the information in [[D3D_Universal_FAQ]] and sent by mail should be more clearly combined and made at least easily findable. 


Visual Version History (as described on [[Merge_Workflow#More_Notes_on_the_Merge_Workflow]]) of on [[D3D_Universal#3D_Printer]] was faulty, so I updated it: 

[[File:Screenshot_2020-01-28_D3D_Universal_-_Open_Source_Ecology.png]] => [[File:Screenshot_2020-01-31_D3D_Universal_-_Open_Source_Ecology.png]]


Some notes at [https://pad.disroot.org/p/rad.b.osesteamcamp rad/b/osesteamcamp pad] 


== 202001'''29'''-'''30''' ==

Attempt to re-base onto a 320x300mm board following the  

Compiled Cura LulzBot Edition from source thru the AUR package manager. 

Had to use AppImage for FreeCAD 0.16 - works well - tho I just work with 0.18 now. 


== 202001'''25'''-'''30''' ==

Struggling with unclear/incomplete [[D3D_Universal_Build_Manual]] and impractical wiki - especially when it comes to correct settings and how to actually get started once built. 

[[OSE_Linux]] doesn't play well with my hardware =/ so I'm dependent on others - it's horribly out-dated - different approach needed.