View source for Highest Temperature FDM Hotends

=Basics=
*This Page explores the Hotends that can reach the Highest Temperature

=Industry Standards=
==E3D==
===Volcano Hotend==
*According to the E3D Wiki, "The E3D-v6 as sold is limited in temperature by the thermistor to 295*C but can go higher (tested up to 420*C) with a thermocouple upgrade."
https://wiki.e3d-online.com/FAQs
*[https://e3d-online.com/volcano-upgrade-kit E3D Store Page for the Volcano Hotend]
===Supervolcano Hotend===
*According to https://all3dp.com ,  Maximum rated operating temperature of the heater is 500°C. 
https://all3dp.com/4/e3d-announces-launch-supervolcano-hotend-offering-11x-volumetric-throughput-v6/
*According to the E3D Store,  The SuperVolcano can reach 285°C natively, and by swapping your thermistor for a thermocouple or PT100 you'll be able to exceed 400°C
https://e3d-online.com/the-e3d-supervolcano
*[https://e3d-online.com/the-e3d-supervolcano E3D Store Page for the Supervolcano Hotend]

==Dyze Design==
===DyzEnd-X Hotend===
*Stock Aircooled, but Liquid Cooling Ready
*500C Max Stock Temp
*[https://dyzedesign.com/dyzend-x-hotend/ Dyze Design Page on The DyzEnd-X Hotend]

===DyzEnd Pro===
*Stock Aircooled, but Liquid Cooling Ready
*500C Max Stock Temp
*[https://dyzedesign.com/dyzend-pro/ Dyze Design Page on The DyzEnd Pro]

===Typhoon Extruder===
*Integrated Hotend
*Stock Watercooled
*500C Max Stock Temp
*[https://dyzedesign.com/typhoon-extruder Dyze Design Page on The Typhoon Extruder]

===Pulsar Pellet Extruder===
*Integrated Hotend
*Stock Watercooled
*500C Max Stock Temp
*Max Extrusion Rate of 500 mm³/s (2.5kg/h)
*Can be used with large nozzles from 1.00mm up to 5.00mm.
*[https://dyzedesign.com/pulsar-pellet-extruder Dyze Design Page on The Pulsar Pellet Extruder]

=See Also=
*

=Useful Links=
*