Highest Temperature FDM Hotends

Basics

• This Page explores the Hotends that can reach the Highest Temperature

Industry Standards

=Volcano Hotend

• According to the E3D Wiki, "The E3D-v6 as sold is limited in temperature by the thermistor to 295*C but can go higher (tested up to 420*C) with a thermocouple upgrade."

https://wiki.e3d-online.com/FAQs

• E3D Store Page for the Volcano Hotend

Supervolcano Hotend

• According to https://all3dp.com , Maximum rated operating temperature of the heater is 500°C.

https://all3dp.com/4/e3d-announces-launch-supervolcano-hotend-offering-11x-volumetric-throughput-v6/

• According to the E3D Store, The SuperVolcano can reach 285°C natively, and by swapping your thermistor for a thermocouple or PT100 you'll be able to exceed 400°C

https://e3d-online.com/the-e3d-supervolcano

• E3D Store Page for the Supervolcano Hotend

Dyze Design

DyzEnd-X Hotend

• Stock Aircooled, but Liquid Cooling Ready
• 500C Max Stock Temp
• Dyze Design Page on The DyzEnd-X Hotend

DyzEnd Pro

• Stock Aircooled, but Liquid Cooling Ready
• 500C Max Stock Temp
• Dyze Design Page on The DyzEnd Pro

Typhoon Extruder

• Integrated Hotend
• Stock Watercooled
• 500C Max Stock Temp
• Dyze Design Page on The Typhoon Extruder

Pulsar Pellet Extruder

• Integrated Hotend
• Stock Watercooled
• 500C Max Stock Temp
• Max Extrusion Rate of 500 mm³/s (2.5kg/h)
• Can be used with large nozzles from 1.00mm up to 5.00mm.
• Dyze Design Page on The Pulsar Pellet Extruder