Warehouse Development Brief: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
We need to update [[Warehouse]] to: | We need to update [[Warehouse]] (specifically, tubing and plates) to: | ||
#The corrected [[Stock Pivot Plate]]. | #The corrected [[Stock Pivot Plate]]. | ||
| Line 5: | Line 5: | ||
#Rounding of corners of the tubing to reflect the real geometry of such tubing. See [[Stock Steel]] page for Stock Metal link. | #Rounding of corners of the tubing to reflect the real geometry of such tubing. See [[Stock Steel]] page for Stock Metal link. | ||
#Generate a version of the tubes in 1/2" wall thickness - the existing is 1/4" wall. | #Generate a version of the tubes in 1/2" wall thickness - the existing is 1/4" wall. | ||
#Generate stock bonding plates (1/2 x 4 or 8 x | #Generate stock bonding plates (1/2 x 4 or 8 x 8 or 12 or 16)with rounded corners to allow for better cylinder mounting | ||
#Tubing files and plates files should be separate to keep file sizes manageable. | |||
Latest revision as of 18:01, 5 July 2013
We need to update Warehouse (specifically, tubing and plates) to:
- The corrected Stock Pivot Plate.
- Correction of all holes to 1-1/8 size.
- Rounding of corners of the tubing to reflect the real geometry of such tubing. See Stock Steel page for Stock Metal link.
- Generate a version of the tubes in 1/2" wall thickness - the existing is 1/4" wall.
- Generate stock bonding plates (1/2 x 4 or 8 x 8 or 12 or 16)with rounded corners to allow for better cylinder mounting
- Tubing files and plates files should be separate to keep file sizes manageable.