Tutorial on Tools and Their Uses: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "*MIG Welder - Millermatic 200 - used weld, from sheet steel to 1" :*Welder has a wire feed for the filler metal and gas shielding for keeping the weld clean *Ironworker Punch/...")
(No difference)

Revision as of 16:03, 4 June 2014

  • MIG Welder - Millermatic 200 - used weld, from sheet steel to 1"
  • Welder has a wire feed for the filler metal and gas shielding for keeping the weld clean
  • Ironworker Punch/Shear/Angle Shear - whenever you have a flat piece that is less than 14" wide, you can cut it. Our ironworker can cut 1"x8" steel, or 1/2"x14"
  • Tubing - you cut with abrasive cutoff (preferred at Factor),(fast blade speed and throws off sparks) saw or band saw, or cold cut saw (a slow spinning, fluid cooled saw)
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Tutorial_on_Tools_and_Their_Uses&oldid=120018"