Jasonshah log

Fri June6, 2014

• Completed the instructional for Secondary Cylinder Assembly of the CEB 6 Press.

Thurs June 5, 2014

• Ongoing work on the Google presentation on the instructional of the Secondary Cylinder Assembly, CEB 6 Press.
• Swarmed with the summer team in the organization efforts at the Workshop.
• Learned about the use of angle grinders and welding operations. Welded wheels to create a mobile steel worktable inside the workshop.
• Assisted in moving materials for the raised beds infront of Hablab.

Wed June 4, 2014

• Started the work on instructional for the Secondary Cylinder Assembly of the CEB 6 Press

File:CEB 6 Press Sec Cylinder Assembly.fcstd

• Completed the assembly of a prototype CEB Press with three other collaborators and under Marcin's supervision.

Tues June 3, 2014

• Learned about several functions for operation of FreeCAD.
• Coordinated the workshop area for access to Power Machines and Hydraulics units.
• Worked with a group to assemble the CEB 6 Press; partial assembly accomplished but confusion with the general outlay of the machine.

Mon June 2, 2014

• Morning session: Learning about features in the OSE Collaboration Architecture
• Build session: Built a 4' * 8' prototype for a panel. Used 2" * 4" wooden beams and screws. These panels can be used for walls, decks. For info go to, chrisc_log
• Assisted in the Agricultural Plantout

June 1, 2014

• Arrived on Factor e Farm Campus. Orientation with the summer team.