D3D Requirements: Difference between revisions

Latest revision as of 00:50, 26 February 2016

Redirect to:

@@ Line 1: / Line 1: @@
-*1 day
+#REDIRECT [[D3D_Printer_Design#Requirements]]
-*Auto bed level
-*OSHWA compliant, possibly Respects Your Freedom certified
-*$500 in parts for single head
-*Wireless to allow for freeing up computer
-*Rubber print capable, without head exchange (critical for OSE gaskets, rubber washers and o-rings in low and high pressure hydraulics and pneumatics)
-*Multiple print head addable, up to 4 for practical considerations
-*Meets or exceeds reliability of Lulzbot (hours of maintenance free printing between any required fix)
-*Addable clear enclosure
-*Functions as an effective RepStrap for building future machines.
-*'''XY-fixed build platform.'''  Not negotiable for reasons of robust design
-*Unheated build platform for low cost, with heated platform as an added module that can be retrofitted readily without compromising bed leveling mechanism.
-*Self-harvesting for mass production part capacity - by having the head bump the parts produced a off the build platform
-*Future: works with irregular-dimension filament?
-*Product Ecology - works with open source filament from open source  filament extruder
-*Functional Logic and design rationale is fully documented
-*conductive metal print capable for Cordless Tool Construction Set. This should be implementable today with conductive filament for basic connections.