CEB Press/Manufacturing Instructions/Controller Box/FeF Liberator Controller: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 54: Line 54:
Shopping list for items which are shipped:
Shopping list for items which are shipped:
*<span style="color:green">Replacement MOSFETs:  
*<span style="color:green">Replacement MOSFETs:  
*<span style="color:green">Arduino breakout shield - [http://store.makerbot.com/arduino-breakout-shield-v1-4-kit.html $25]
*<span style="color:green">[1] Arduino breakout shield - [http://store.makerbot.com/arduino-breakout-shield-v1-4-kit.html $25]
*<span style="color:green">Arduino (Duemilanove) - [http://store.makerbot.com/arduino.html $30]
*<span style="color:green">[1] Arduino (Duemilanove) - [http://store.makerbot.com/arduino.html $30]
*<span style="color:green">
*<span style="color:green">[2] Solenoid drivers -[http://store.makerbot.com/pwm-driver-v1-1-kit.html $13 ea.]
*<span style="color:green">
*<span style="color:green">
*<span style="color:green">
*<span style="color:green">

Revision as of 01:47, 23 October 2010

Step 1

  • Source 7/16" thick, 6" wide u-channel: 20 feet of it.
  • Pieces needed: (click on image to enlarge)

Feflibframe.jpg

  • Torch or cold-cut channel to size

Channel.jpg

  • Punch holes

Punchedholes.jpg

Step 2

Source the electronics. Here is a diagram of the controller box

Controllerbox.jpg

Here is the complete controller installed:

Controllerboxinstalled.jpg

Electronics Box
Electronics Box

Gross Electronics:

  • Electronics Box - local hardware store
  • Extension Cord
  • 2 alligator clips for battery connection - auto parts store
  • House wiring box (blue box in picture above below the Arduino Shield - hardware store
  • Fuse holder - car parts store
  • 12v quick connect plugs - 5 pairs - for quick-coupling to solenoids out of controller box - car parts store
  • Stranded 5A wire for solenoid connections
  • Spade terminals (10) for connection to solenoid terminals
  • Underground phone cable - makes very tough connectors for sensors
  • Potting compound
  • PVC pipe - with 1 end capped
  • Stranded Cat 5 wire for sensor connections
  • [5] Supermagnets -

Microelectronics:

  • [2] Hall Effect Sensors - Sparkfun
  • [1] Arduino shield kit - Makerbot
  • [1] Arduino - Makerbot
  • [2] RepRap PWM Driver Boards

Components for PWM Driver Boards

  • [1] Replacement MOSFETS -
  • []

Step 3

Shopping list for items which are shipped:

  • Replacement MOSFETs:
  • [1] Arduino breakout shield - $25
  • [1] Arduino (Duemilanove) - $30
  • [2] Solenoid drivers -$13 ea.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Controller_Box/FeF_Liberator_Controller&oldid=14622"