Revision as of 17:11, 23 October 2010

Step 1

Source the electronics. Here is a diagram of the controller box

Here is the complete controller installed:

Electronics Box

Gross Electronics:

Electronics Box - local hardware store
Extension Cord
- Or house wiring with Female Plug and Male Plug.
2 alligator clips for battery connection - auto parts store
House wiring box (blue box in picture above below the Arduino Shield - hardware store
Fuse holder - car parts store
12v quick connect plugs - 5 pairs - for quick-coupling to solenoids out of controller box - car parts store
Stranded 5A wire for solenoid connections
Spade terminals (10) for connection to solenoid terminals
Underground phone cable - makes very tough connectors for sensors
Potting compound
PVC pipe - with 1 end capped
Stranded Cat 5 wire for sensor connections
[5] Supermagnets -

Microelectronics:

Components for PWM Driver Boards

Shopping list for items which are shipped:

[1] Arduino breakout shield - $25, Makerbot
[1] Arduino (Duemilanove) - $30, Makerbot
[2] Solenoid drivers -$13 ea., Makerbot
- total cost with shipping - $88.25
[4] MOSFET replacements (http://forums.reprap.org/read.php?13,41238,41255,quote=1 see discussion) for solenoid drivers, VNP35N07-E - $3.34, Future Electronics (if not available, search at Octopart) (grate shaker is automated, no sensors needed for it)
- Notes: The cheaper version recommended by Nophead from RepRap was this [1]. .
- Total $25.70 (for 5)
[2] Hall Effect sensors - $0.95 ea, Sparkfun
- Total $9.16 (for 5)
[4] 3/8" V-groove bearings - $7.77 ea, VXB
- Total $42.47
[6] Supermagnets - $0.48, Gaussboys
- Total $11.11 (for 12)

Grand total for electronics, magnets, and bearings - $176.69

@@ Line 58: / Line 58: @@
 *<span style="color:green">[2] Solenoid drivers -[http://store.makerbot.com/pwm-driver-v1-1-kit.html $13 ea.], Makerbot
 **total cost with shipping - $88.25
-*<span style="color:green">[4] MOSFET replacements for solenoid drivers, VNP35N07-E - [http://www.futureelectronics.com/en/technologies/semiconductors/analog/drivers/mosfet-igbt-drivers/Pages/3890498-VNP35N07-E.aspx $3.34], Future Electronics (if not available, search at Octopart) (grate shaker is automated, no sensors needed for it)
+*<span style="color:green">[4] MOSFET replacements (http://forums.reprap.org/read.php?13,41238,41255,quote=1 see discussion) for solenoid drivers, VNP35N07-E - [http://www.futureelectronics.com/en/technologies/semiconductors/analog/drivers/mosfet-igbt-drivers/Pages/3890498-VNP35N07-E.aspx $3.34], Future Electronics (if not available, search at Octopart) (grate shaker is automated, no sensors needed for it)
+**Notes: The cheaper version recommended by Nophead from RepRap was this [http://octopart.com/partsearch/#search/requestData&q=VNP14NV04-E].  .
 **Total $25.70 (for 5)
 *<span style="color:green">[2] Hall Effect sensors - [http://www.sparkfun.com/commerce/product_info.php?products_id=9312 $0.95 ea], Sparkfun