D3D Performance Log: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Thu Mar 30, 2017= *The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver. *Note that...") |
(No difference)
|
Revision as of 02:02, 31 March 2017
Thu Mar 30, 2017
- The geometry shown below matches the control code configuration of D3D - with dual Y axis configured by running from the second extruder driver.
- Note that Y axis will be reversed if the plugs are reversed. No need to correct direction in code - just turn off machine and switch the y stepper driver plugs.
- Note that the extruder motor had to be rewired (switch middle 2 wires)