Hydraulic Cooler Sizing: Difference between revisions
Tom Griffing (talk | contribs) |
|||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 11: | Line 11: | ||
kW: Total Horsepower * 0.3 * 0.735 | kW: Total Horsepower * 0.3 * 0.735 | ||
===Heat to | ===Heat to Dissipate=== | ||
Hydraulic coolers are often specified by their ability to dissipate heat - usually measured in BTU/hr, horsepower or watts | Hydraulic coolers are often specified by their ability to dissipate heat - usually measured in BTU/hr, horsepower or watts | ||
| Line 25: | Line 25: | ||
! KW Formula | ! KW Formula | ||
! KW | ! KW | ||
|- | |||
|16 | |||
| | |||
| | |||
| | |||
|11000 | |||
| | |||
|3 | |||
|- | |- | ||
|28 | |28 | ||
| Line 41: | Line 49: | ||
|50 * 0.25 * 0.735, 50 * 0.3 * 0.735 | |50 * 0.25 * 0.735, 50 * 0.3 * 0.735 | ||
|9.1875 - 11.025 | |9.1875 - 11.025 | ||
|- | |||
|65 | |||
|65 * 0.25, 65 * 0.3 | |||
|16.25 - 19.5 | |||
|65 * 0.25 * 2542, 65 * 0.3 * 2542 | |||
|41307 - 49569 | |||
|65 * 0.25 * 0.735, 65 * 0.3 * 0.735 | |||
|11.943 - 14.3325 | |||
|} | |} | ||
| Line 46: | Line 62: | ||
Select a cooler based on the BTU/hr derived in step 1 above. For the case of the 50 hp Power Cube, search for coolers that dissipate between 31775 and 38130 BTU/hr. Vendors list cooler specs with heat dissipation and Gallons/Min or Liters/Min. | Select a cooler based on the BTU/hr derived in step 1 above. For the case of the 50 hp Power Cube, search for coolers that dissipate between 31775 and 38130 BTU/hr. Vendors list cooler specs with heat dissipation and Gallons/Min or Liters/Min. | ||
AKG Mobile oil coolers: | AKG Mobile oil coolers: | ||
| Line 66: | Line 75: | ||
Hayden model 1284 meets the requirements and is 16-3/4" x 24" x 1-1/2" in size. | Hayden model 1284 meets the requirements and is 16-3/4" x 24" x 1-1/2" in size. | ||
Note | Note: The "COOLING BTU / HR" ratings is with 2500 cubic-ft/min airflow and 100°F differential in oil and air temperatures. | ||
So, this requires a fan to move the air to meet these requirements. | |||
Thermal Transfer Mobile MA series coolers: | |||
http://www.industrialheattransfer.com/Air-Cooled/MA%20Series.pdf | |||
The "MA-20" (13.78" x 14.33") and "MA-18" (11.81" x 11.81") cores have the proper heat transfer specs | |||
The "MA-18-4" is the "MA-18" core with a 12v electric fan, the MA-20 has no fan option | |||
Of the three models listed above, the MA-18 and MA-20 from Thermal Transfer are the only ones whose cooling area are square. This shape is best suited for a circular fan. If all other factors are the same, one of these would be the obvious choice. | |||
===Summary=== | ===Summary=== | ||
We have seen how to assess the heat dissipation of a hydraulic system and how to select an oil cooler for dissipating this heat. | We have seen how to assess the heat dissipation of a hydraulic system and how to select an oil cooler for dissipating this heat. | ||
Latest revision as of 06:47, 15 August 2017
This page describes how to size a hydraulic oil cooler for a hydraulic system.
Formulas
Heat dissipated in a hydraulic system can be determined by summing the inefficiencies of all components in the system, but is usually between 25% and 30%. In this document, we will use the range of 25% - 30%.
Heat dissipated is units of BTU/hr, horsepower or kW. This document will show heat dissipation in all three units (only 30% inefficiency shown):
BTU/hr: Total Horsepower * 0.3 * 2542 Horsepower: Total Horsepower * 0.3 kW: Total Horsepower * 0.3 * 0.735
Heat to Dissipate
Hydraulic coolers are often specified by their ability to dissipate heat - usually measured in BTU/hr, horsepower or watts
Here are some calculations for OSE engines:
| Engine hp | HP Formula | Horsepower | BTU Formula | BTU/hr | KW Formula | KW |
|---|---|---|---|---|---|---|
| 16 | 11000 | 3 | ||||
| 28 | 28 * 0.25, 28 * 0.3 | 7 - 8.4 | 28 * 0.25 * 2542, 28 * 0.3 * 2542 | 17794 - 21352 | 28 * 0.25 * 0.735, 28 * 0.3 * 0.735 | 5.145 - 6.174 |
| 50 | 50 * 0.25, 50 * 0.3 | 12.5 - 15 | 50 * 0.25 * 2542, 50 * 0.3 * 2542 | 31775 - 38130 | 50 * 0.25 * 0.735, 50 * 0.3 * 0.735 | 9.1875 - 11.025 |
| 65 | 65 * 0.25, 65 * 0.3 | 16.25 - 19.5 | 65 * 0.25 * 2542, 65 * 0.3 * 2542 | 41307 - 49569 | 65 * 0.25 * 0.735, 65 * 0.3 * 0.735 | 11.943 - 14.3325 |
Selecting a Cooler
Select a cooler based on the BTU/hr derived in step 1 above. For the case of the 50 hp Power Cube, search for coolers that dissipate between 31775 and 38130 BTU/hr. Vendors list cooler specs with heat dissipation and Gallons/Min or Liters/Min.
AKG Mobile oil coolers:
http://www.akgts.com/fileadmin/_akgts/pdf/Cool_LineD_en.pdf The AKG "D11" cooler seems to meet our requirements.
Hayden Auto lists coolers by BTU/hr in the section "Heavy Duty Oil Coolers":
http://www.haydenauto.com/upload/HaydenAuto/Documents/Cat_Hayden/2007-hayden-trans-oil-coolers.pdf Hayden model 1284 meets the requirements and is 16-3/4" x 24" x 1-1/2" in size. Note: The "COOLING BTU / HR" ratings is with 2500 cubic-ft/min airflow and 100°F differential in oil and air temperatures. So, this requires a fan to move the air to meet these requirements.
Thermal Transfer Mobile MA series coolers:
http://www.industrialheattransfer.com/Air-Cooled/MA%20Series.pdf The "MA-20" (13.78" x 14.33") and "MA-18" (11.81" x 11.81") cores have the proper heat transfer specs The "MA-18-4" is the "MA-18" core with a 12v electric fan, the MA-20 has no fan option
Of the three models listed above, the MA-18 and MA-20 from Thermal Transfer are the only ones whose cooling area are square. This shape is best suited for a circular fan. If all other factors are the same, one of these would be the obvious choice.
Summary
We have seen how to assess the heat dissipation of a hydraulic system and how to select an oil cooler for dissipating this heat.