Open Source Watercraft Hull Printer: Difference between revisions
Jump to navigation
Jump to search
(Minor Clarification) |
(Minor usability improvments) |
||
| Line 1: | Line 1: | ||
==Basics== | ==Basics== | ||
- Part of the [[Open Source Digital Fabrication Construction Set]] | |||
- It is essentially a massively scaled up (most likely garage/warehouse sized) [[D3D Fiberglass Printer]] | - It is essentially a massively scaled up (most likely garage/warehouse sized) [[D3D Fiberglass Printer]] | ||
Revision as of 03:42, 17 December 2017
Basics
- Part of the Open Source Digital Fabrication Construction Set
- It is essentially a massively scaled up (most likely garage/warehouse sized) D3D Fiberglass Printer
- It will also most likely require a Open Source Cleangarage to prevent dust buildup due to the long print time, and unenclosed nature of the giant build area
- Also require a heated build chamber...but at room scale
- This may seem daunting, but it will provide custom designed, mass produced hulls for the Open Source Watercraft Construction Set