Revision as of 21:48, 4 May 2018

Basics

Part of the Open Source Digital Fabrication Construction Set
It is essentially a massively scaled up (most likely garage/warehouse sized) D3D Fiberglass Printer
It will also most likely require a Open Source Cleangarage to prevent dust buildup due to the long print time, and unenclosed nature of the giant build area
Also require a heated build chamber...but at room scale
It may also use the laarger universal CNC axis (The same one as the CNC Torch Table)
This may seem daunting, but it will provide custom designed, mass produced hulls for the Open Source Watercraft Construction Set

The printing of watercraft hulls
The printing of molds/forms for watercraft hull construction by conventionaal means

@@ Line 4: / Line 4: @@
 *It will also most likely require a [[Open Source Cleangarage]] to prevent dust buildup due to the long print time, and unenclosed nature of the giant build area
 *Also require a heated build chamber...but at room scale
+*It may also use the laarger universal CNC axis (The same one as the [[CNC Torch Table]])
 *This may seem daunting, but it will provide custom designed, mass produced hulls for the [[Open Source Watercraft Construction Set]]
+=Used For=
+*The printing of watercraft hulls
+*The printing of molds/forms for watercraft hull construction by conventionaal means
+=Industry Standards=
+*[https://www.youtube.com/watch?v=IL9xdQ_rRS8 This design by the U.S.A. D.O.E]
+*[https://www.youtube.com/watch?v=QVqWM7T8dcI Same device as above with a different video]
+=Existing Open Source Designs=
+*
+=Minimum Viable Product=
+*
+=Basic Design=
+*
+=BOM=
+*
+=See Also=
+*
+=Useful Links=
+*