Cura Machine Settings Notes: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Note that in Machine Settings, if E steps per mm are set to 0, the print still works. So it appears that the conifiguration.h value for E steps takes precedence. It is not in...") |
(No difference)
|
Revision as of 01:49, 27 May 2018
- Note that in Machine Settings, if E steps per mm are set to 0, the print still works. So it appears that the conifiguration.h value for E steps takes precedence. It is not in EEPROM as current version (Titan Aero) has EEPROM turned off.