MicroTrac v17.10 Performance Data Collection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
<html><iframe src="https://www. | *First test drive: | ||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/2wTp-NM8PyE" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe></html> | |||
*Field work filling growing beds: | |||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/YM62_oJczM4" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe></html> | |||
*Needs more torque for turning. Possible solutions are a yet smaller pump. Need to take pressure data to assess pressure limits | |||
*Power cube cooling needs resolution - motor has only 1.5 amps, not sufficient to run a cooling fan | |||
*Power Cube next iteraction has cooling via air intake of [[Power Cube v17.11]] | |||
*Needs improved operator stand | |||
*Needs refinement of valves and refinement of hoses to include metal hoses | |||
*Some issue regarding blockage of quick connects on curl cylinder needs to be resolved | |||
*Needs refinement of loader geometry | |||
*Quick connect Bobcat standard - works perfectly | |||
Latest revision as of 17:36, 13 June 2018
- First test drive:
- Field work filling growing beds:
- Needs more torque for turning. Possible solutions are a yet smaller pump. Need to take pressure data to assess pressure limits
- Power cube cooling needs resolution - motor has only 1.5 amps, not sufficient to run a cooling fan
- Power Cube next iteraction has cooling via air intake of Power Cube v17.11
- Needs improved operator stand
- Needs refinement of valves and refinement of hoses to include metal hoses
- Some issue regarding blockage of quick connects on curl cylinder needs to be resolved
- Needs refinement of loader geometry
- Quick connect Bobcat standard - works perfectly