D3D Workshop 2018-06-02: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 13: | Line 13: | ||
Because it was just us at the workshop, we decided to iterate as an experiemntal build. For example: | Because it was just us at the workshop, we decided to iterate as an experiemntal build. For example: | ||
# | # We mounted all of the electronics onto a sheet plexiglass for the first time. The plexiglass was cut to size so it didn't interfere with the axis, the electronics were attached to the plexiglass with zipties through drilled holes, and the entire plexiglass + electronics panel was mounted to the frame using magnets | ||
# We used a different extruder | |||
# We added the reprap Smart Controller with LCD screen, knob, and sd card reader | |||
=Learnings= | =Learnings= | ||
Revision as of 00:10, 15 June 2018
On Saturday 2018-06-02, OSE went to the Homestead Hoedown outside Lawrence, Kansas to build a new version of the D3D.
Participants
We had 3 participants at this workshop:
New Iteration Changes
Because it was just us at the workshop, we decided to iterate as an experiemntal build. For example:
- We mounted all of the electronics onto a sheet plexiglass for the first time. The plexiglass was cut to size so it didn't interfere with the axis, the electronics were attached to the plexiglass with zipties through drilled holes, and the entire plexiglass + electronics panel was mounted to the frame using magnets
- We used a different extruder
- We added the reprap Smart Controller with LCD screen, knob, and sd card reader
Learnings
Time Lapse
The following video was created from the Open Camera app on Android then edited with kdenlive.
It was also archved on archive.org