EEPROM Settings: Difference between revisions
Jump to navigation
Jump to search
(Created page with "See https://github.com/MarlinFirmware/Marlin/wiki/EEPROM") |
No edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
See https://github.com/MarlinFirmware/Marlin/wiki/EEPROM | See https://github.com/MarlinFirmware/Marlin/wiki/EEPROM | ||
Values are stored in EEPROM and will be maintained upon power down of Arduino. But EEPROM works only if enabled in Marlin? | |||
==== EEPROM GCodes ==== | |||
*M500 Store current settings in EEPROM for the next startup or M501. | |||
*M501 Read all parameters from EEPROM. (Or, undo changes.) | |||
*M502 Reset current settings to defaults, as set in Configurations.h. (Follow with M500 to reset the EEPROM too.) | |||
*M503 Print the current settings – ''Not the settings stored in EEPROM.'' | |||
Latest revision as of 23:13, 14 July 2018
See https://github.com/MarlinFirmware/Marlin/wiki/EEPROM
Values are stored in EEPROM and will be maintained upon power down of Arduino. But EEPROM works only if enabled in Marlin?
EEPROM GCodes
- M500 Store current settings in EEPROM for the next startup or M501.
- M501 Read all parameters from EEPROM. (Or, undo changes.)
- M502 Reset current settings to defaults, as set in Configurations.h. (Follow with M500 to reset the EEPROM too.)
- M503 Print the current settings – Not the settings stored in EEPROM.