D3D Quality Control Checklist: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Carriage= *Check that carriage does not wobble after bearings are inside. If wobble does occur - it can be 2 sources: (1) undersized rods; (2) oversized bearing holder recess...") |
(No difference)
|
Latest revision as of 18:23, 31 July 2018
Carriage
- Check that carriage does not wobble after bearings are inside. If wobble does occur - it can be 2 sources: (1) undersized rods; (2) oversized bearing holder recesses in the 3D printed piece.