LifeTrac II mark2: Difference between revisions
Jump to navigation
Jump to search
(Created page with "'''LifeTrac II mark2''' is 18" shorter than '''LT2 mark1'''. Sketch 1 - In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by cutt...") |
No edit summary |
||
| Line 2: | Line 2: | ||
Sketch 1 - | Sketch 1 - | ||
In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by | In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by shortening the rear of the 4 base and 2 overhead 4×4×1/4" square tubes that run horizontal with the ground. | ||
Sketch 2 - | Sketch 2 - | ||
The '''middle column''' has been moved back to behind the '''front loader over-head shaft''' so it now sits in between the front and rear loader arm shafts. Also the real loader arm hydraulic cylinders have been changed to these - https://www.surpluscenter.com/item.asp?item=9-7602-14&catname=hydraulic | The '''middle column''' has been moved back to behind the '''front loader over-head shaft''' so it now sits in between the front and rear loader arm shafts. Also the real loader arm hydraulic cylinders have been changed to these - https://www.surpluscenter.com/item.asp?item=9-7602-14&catname=hydraulic | ||
which means adding extra mounting plates to the rear loader arm to attach them. | which means adding extra mounting plates to the rear loader arm to attach them. | ||
Revision as of 15:29, 6 February 2011
LifeTrac II mark2 is 18" shorter than LT2 mark1.
Sketch 1 - In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by shortening the rear of the 4 base and 2 overhead 4×4×1/4" square tubes that run horizontal with the ground.
Sketch 2 -
The middle column has been moved back to behind the front loader over-head shaft so it now sits in between the front and rear loader arm shafts. Also the real loader arm hydraulic cylinders have been changed to these - https://www.surpluscenter.com/item.asp?item=9-7602-14&catname=hydraulic
which means adding extra mounting plates to the rear loader arm to attach them.