10 mm Calibration Cube: Difference between revisions
Jump to navigation
Jump to search
(→Gcode) |
(→Gcode) |
||
| Line 4: | Line 4: | ||
=Gcode= | =Gcode= | ||
*For Titan Aero 3 mm version of official D3D v18.10 product release. - [[File:calibcubetitan. | *For Titan Aero 3 mm version of official D3D v18.10 product release. - [[File:calibcubetitan.rtf]]. | ||
Note that .txt should be replaced with .gcode for D3D operation. .gcode is not an accept | Note that .txt should be replaced with .gcode for D3D operation. .gcode is not an accept | ||
Revision as of 21:37, 7 November 2018
Download
QUICK TEST FILE: File:Hollow10.stl
Gcode
- For Titan Aero 3 mm version of official D3D v18.10 product release. - File:Calibcubetitan.rtf.
Note that .txt should be replaced with .gcode for D3D operation. .gcode is not an accept
1 cm Cube
- http://www.thingiverse.com/thing:4249
- For reference, STL: File:Hollow10.stl
- Gcode: File:Hollow10.gcode
About 1 cm Cube with no top
10"x10"x6" Bottomless Box, Single Layer
This explore large size printing on D3D v18.0
6"x6"x6" Bottomless Box, Single Layer
This explore large size printing on D3D v18.0