How to Wire a Pressure Sensor to Arduino: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*First, see how to program a button - [https://programmingelectronics.com/tutorial-17-using-a-button-old-version/] :*Connecting a button involves connecting one wire to 5V fro...") |
No edit summary |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
*First, see how to program a button - [https://programmingelectronics.com/tutorial-17-using-a-button-old-version/] | *First, see how to program a button - [https://programmingelectronics.com/tutorial-17-using-a-button-old-version/] | ||
:*Connecting a button involves connecting one wire to 5V from one of the Arduino pins, and connecting the other wire to the Arduino pin that does the reading. We also need a resistor to ground - so that when the putton is not presssed, the pin is pulled down to 0. | :*Connecting a button involves connecting one wire to 5V from one of the Arduino pins, and connecting the other wire to the Arduino pin that does the reading. We also need a resistor to ground - so that when the putton is not presssed, the pin is pulled down to 0. | ||
*Read about pin function as input or output on Arduino - [https://www.arduino.cc/en/Tutorial/DigitalPins] | |||
:*We can avoid external resistors because Arduino contains pullup resistors that can be activated in software | |||
'''Summary:''' Save yourself the complexity of extra parts by avoiding extra resistors, because you can use ones that are inside the Arduino already. See Instructables - [https://www.instructables.com/id/Arduino-Button-with-no-resistor/] | |||
=Pressure Trigger Switch= | |||
*For the OSE CEB press, we use a switch that is simply an on-off function | |||
*This can be read as in the above example. | |||
Latest revision as of 03:59, 11 January 2019
- First, see how to program a button - [1]
- Connecting a button involves connecting one wire to 5V from one of the Arduino pins, and connecting the other wire to the Arduino pin that does the reading. We also need a resistor to ground - so that when the putton is not presssed, the pin is pulled down to 0.
- Read about pin function as input or output on Arduino - [2]
- We can avoid external resistors because Arduino contains pullup resistors that can be activated in software
Summary: Save yourself the complexity of extra parts by avoiding extra resistors, because you can use ones that are inside the Arduino already. See Instructables - [3]
Pressure Trigger Switch
- For the OSE CEB press, we use a switch that is simply an on-off function
- This can be read as in the above example.