Ultrasonic Sensor: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
|||
| Line 14: | Line 14: | ||
*Speed of sound is about 1100 ft/sec | *Speed of sound is about 1100 ft/sec | ||
*It varies slightly with temperature | *It varies slightly with temperature | ||
*Graph here shows errors around 1/100" for our desired sensing distance - [https://www.sensorsmag.com/components/choosing-ultrasonic-sensor-for-proximity-or-distance-measurement-part-1-optimizing] | *'''Graph here shows errors around 1/100" for our desired sensing distance''' - [https://www.sensorsmag.com/components/choosing-ultrasonic-sensor-for-proximity-or-distance-measurement-part-1-optimizing] | ||
*Thus, simply getting an ultrasonic sensor that works would be a good start. | *Thus, simply getting an ultrasonic sensor that works would be a good start. | ||
Revision as of 21:08, 1 March 2019
Industry Standards
- Common HC-SR04 1 cm accuracy sensor - Sparkfun - [1]. Claims 3 mm resolution, which would work for CNC torch.
- Migatron - [2]
- High precision - 1/20 of a % accurate, at 5-30". Only $2000! Not. [3]
- https://www.migatron.com/rps-400-6/ - 400kHz and 2.1 ms response time.
Arduino Simplicity
- Thread on the precision of the HC-SR04 sensor - [4]
- 2.5% is the general figure. so for 25 cm distance - get 0.6 cm off.
- Does that imply that for 5 cm distance, we are 0.1 cm off? That would work for the OSE sensor case.
Calculations
- Speed of sound is about 1100 ft/sec
- It varies slightly with temperature
- Graph here shows errors around 1/100" for our desired sensing distance - [5]
- Thus, simply getting an ultrasonic sensor that works would be a good start.
Links
- Inductive Height Sensor
- Ultrasound sensors for robots - [6]
Inquiry to Migatron
- We are working on a CNC torch table for oxyfuel torching of heavy sheet metal. We need to detect distance of the cutting torch from the workpiece by measuring close to the cut line. This means a hot environment with possibility of smoke. Our accuracy of height measurement should be 1/16" (1-2 mm). Can you please suggest one of your products? What is the price?