3D Printed Calipers: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
=Intro= | |||
Accurate to -/+ 2.5 thousandths - | Accurate to -/+ 2.5 thousandths - | ||
Line 10: | Line 11: | ||
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/QP7harBuc-Q" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html> | <html><iframe width="560" height="315" src="https://www.youtube.com/embed/QP7harBuc-Q" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></html> | ||
=Assessment= | |||
*SLA - which is what was used to print the calipers - has 140 micron spot size, and layer heights of 25 to 100 microns. |
Revision as of 20:14, 23 March 2019
Intro
Accurate to -/+ 2.5 thousandths -
http://thecornercase.blogspot.com/2014/03/3d-printed-dial-calipers.html
STL files on Thingiverse - https://www.thingiverse.com/thing:187267
Optimized for regular FDM printer - https://www.thingiverse.com/thing:1271651
Note: this was printed on a Stratasys Objet Eden stereolithography (SLA) (laser-cured resin) printer - so may be better than normal printers can do.
Assessment
- SLA - which is what was used to print the calipers - has 140 micron spot size, and layer heights of 25 to 100 microns.