TMC 2130 Stepper Drivers: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "=Wire Via SPI= <html><iframe width="560" height="315" src="https://www.youtube.com/embed/AVHVCPcFHUs" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyrosco...")
 
No edit summary
Line 5: Line 5:
*Solder certain bridges on the driver - not easy
*Solder certain bridges on the driver - not easy
*Change Marlin code in configuration_adv.h
*Change Marlin code in configuration_adv.h
*Need to change pins_RAMPS file to tell which pins are being used

Revision as of 16:36, 14 April 2019

Wire Via SPI

  • Solder certain bridges on the driver - not easy
  • Change Marlin code in configuration_adv.h
  • Need to change pins_RAMPS file to tell which pins are being used