OSE Marlin: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 1: Line 1:
=Genealogy=
=Genealogy=
*Marlin - [[File:Marlin_v1902.zip]] - 0.8 mm nozzle. Change log: endstop_reversing was reversed on X and Y compared to former versions, where we now use default after going to plain endstop, and not the endstop breakout board. '''Cura profile''' - 0.8 nozzle with Volcano - [[File:cura1902.ini]]
*Marlin - [[File:Marlin_v1902.zip]] - 0.8 mm nozzle. Change log: endstop_reversing was reversed on X and Y compared to former versions, where we now use default after going to plain endstop, and not the endstop breakout board. '''Cura profile''' - 0.8 nozzle with Volcano - [[File:cura1902.ini]]
*[[File:Marlin v1810.zip]] - 0.4 mm nozzle
*[[File:Marlin v1810.zip]] - 0.4 mm nozzle. Cura profile - [[File:Marlin v1810.ini]]


=Links=
=Links=

Revision as of 18:25, 30 April 2019

Genealogy

Links

For D3D software, see D3D_v18.10#OSE_Marlin

Lulzbot Source

  • OSE D3D 3D printer builds upon Marlin, Lulzbot Cura, and the Lulzbot Mini 2 omnidirectional fan shroud. D3D and Lulzbot have the same extruder in common - we both use the E3D Titan Aero extruder. This means that the extruder configuration is identical for both printers - such as retraction settings, steps per mm, etc.
  • See Lulzbot Mini software here - http://download.lulzbot.com/Mini/2.0.0/software/marlin/